Read on this page and follow the guide to migrating Windows OS from HDD to SSD. EaseUS OS migration tool makes it easy and safe to transfer and move os to SSD/HDD without reinstallation.
Since SSDs have better performance, users may want to migrate their operating systems to SSDs for a smoother experience. Are you looking for a tool that can migrate OS to SSD? If yes, you are in the right place. This article provides a step-by-step guide to migrating OS to SSD with EaseUS Partition Master.
Before we start the tutorial, let's check the overview of how to migrate OS to SSD:
⏱️ Duration | 20 minutes - 1 hour+ |
💻 Supported Systems | Windows 11/10/8/7 |
⛏️ Preparations | Windows PC, SSD (and connection cable for SATA), download system migration software - EaseUS Partition Master |
👣 Steps |
Follow and proceed to learn how to migrate the Windows operating system to SSD in your PC manually:
Step 1: Make your SSD ready - install it correctly on your PC.
Make sure Windows can detect and access your SSD at first. Install the SSD via a USB connection cable and plug it into your PC, or insert it into the SSD slot if it's an NVMe or M.2 SSD. For a brand new SSD, open Disk Management and initialize SSD to the same partition style as the OS drive.
Step 2: Create a backup of your data and save it to an external disk if necessary.
In case of unexpected system transfer failure or interruption causing data loss issues, it's wise to create a backup of valuable data to an external hard drive in advance.
Step 3: Create a System Image of your Windows PC.
Once the SSD gets ready, you can create a system backup image by going to Control Panel > Backup & Restore > Create a System Image. Then, navigate to select a disk where you want to save the system image.
Step 4: Perform System Image Recovery to migrate OS to your SSD.
Use a USB flash drive to create a Windows installation media and boot the PC from the bootable media. Set to install Windows on your target SSD, at the install window, select "Repair your computer" and enter the Troubleshooting window. Select System Image Recovery from the Advanced options window, then select the System image to restore to SSD.
Step 5: Make the Windows bootable on the new SSD.
Reboot the PC and, press the F2/F10/Del key to enter BIOS, set the new SSD as the boot drive in the boot menu. Save the changes and reboot the PC.
If you prefer an easier or beginner's guide for migrating the Windows operating system to your new SSD, follow the next guide for more details.
The "Migrate OS" feature in EaseUS Partition Master can help you transfer all data on the system and boot partitions, including OS and applications, to a new SSD or HDD without reinstalling Windows OS and apps. This feature will significantly make OS migration easy and save you time.
Follow the step-by-step tutorials below to migrate OS from HDD to SSD with simple clicks.
Step 1. Launch EaseUS Partition Master, go to the Clone section, click "Migrate OS" and click "Next" to continue.
Step 2. Select the target SSD you want to move Windows OS to, and click "Next".
Step 3. Click "Yes" to confirm that you want to execute the operation.
Step 4. Click "Start" to start migrating your OS to the new SSD.
Complete the steps to migrate OS from HDD to SSD. Then, finish the following steps to make your computer boot from the cloned SSD. This part is crucial since it determines whether you can boot the OS. Share this article and let others know how.
Step 1. Restart PC, and press F2/F8/F11 or Del key to enter the BIOS.
Step 2. Go to the boot section and set the cloned SSD as the boot drive in BIOS.
Step 3. Save the changes and restart the PC.
Now, you should be able to boot your computer from the new SSD with transffered Windows.
Aside from transferring OS from HDD to SSD, EaseUS Partition Master also makes it easy to help you partition HDD/SSD and make full use of your disk:
Is it good to migrate OS from HDD to SSD? Yes, sure. SSD surpasses HDD in many aspects, such as data reading and writing speed, low noise, and high performance. Also, newer systems require higher disk storage performance, so it's necessary for you to transfer Windows to a new SSD.
As a powerful and full-featured tool, EaseUS Partition Master can quickly and safely migrate your operating system from HDD/SSD to SSD. You can use this tool to get better performance when you encounter the following situations:
In short, there are many scenarios for migrating an operating system. Migrating a system using professional tools does not result in data loss. Migrating OS to SSD with EaseUS Partition Master is a wise choice.
Following this tutorial, you can easily migrate your operating system to SSD! EaseUS Partition Master can greatly help you. It simplifies the process and increases the migration success rate.
Later, you can also use this tool to optimize the performance of SSDs, such as 4K-aligned SSDs. If you have any needs, download EaseUS Partition Master for free and try this tool!
The following are the highly relevant questions about EaseUS Partition Master and its Clone and Migrate OS features. Check the brief answers if you also have any of these problems.
You can use the Clone option of EaseUS Partition Master to clone HDD or SSD. You can even clone a larger HDD to a smaller SSD.
Step 1. Open EaseUS Partition Master. Right-click the source disk that you want to copy or clone. Then, select "Clone".
Step 2. Choose the target SSD as your destination and click "Next" to continue.
Step 3. You can select "Autofit the disk," "Clone as the source," or "Edit disk layout" Edit your disk layout.
Step 4. Click the "Execute the operation" option and click "Apply" to start cloning a hard drive to SSD.
You can use the Clone feature of EaseUS Partition Master to clone a partition or an entire disk. You can clone HDD to HDD or copy HDD to SSD. This function is best used to clone data disks. If you want to clone system disks, we recommend you try the Migrate OS option.
Migrate OS can clone your system disk to a larger HDD or an SSD without reinstalling or any boot issues. As it will copy the system partition and boot drive together to ensure the target disk can be correctly booted after the work.
You may not be able to migrate OS from HDD to SSD due to an unspecific cause. In this case, the most effective way is to choose a reliable system migration software to do the job. Download EaseUS Partition Master to migrate OS to SSD.
To migrate OS to SSD:
There are a few reasons your cloned SSD won’t boot, such as incomplete clone, clone failure, BCD error, improper boot order, and so on. You can try these solutions to fix the SSD not working after cloning.
Related Articles
3 Simple Ways to Assign a Drive Letter in Windows 10/8/7
Low Level Format Tool Download, 2024 Review [Pros & Cons]
Solved: Black Screen After Installing Windows 10
How to Partition Western Digital Hard Drive on Windows 11/10/8/7